Instructions – Penis Sleeve Extension:
How to unpack:
- On opening the package, you will find the vibrator along with the sleeve. The vibrator comes with batteries inside it.
- Hold the vibrator and rotate the top gently to take off the cover. You will find a piece of insulating sheet put in place.
- Take out the sheet and gently put the cover back on by rotating it. Proceed to put the vibrator inside the pouch at the end of the sleeve (as shown in the product image on the product page here)
How to use:
- The vibrator consists of a powerful vibration mode. You can start the vibrator by long-pressing the button at the top of the vibrator.
- To stop the vibrator, long-press the same button until the vibration stops.
- Use good amount of lube with the sleeve to avoid any unwanted friction or uneasiness. Do not use a moisturizing cream or any oil-based lubricant, as it damages the surface of the sleeve in the long run. Use water-based lube only.
- It is strongly advisable to clean the sleeve after every use to maintain hygiene.
- You can clean it with water, along with washing with a soft detergent. Harsh detergents can damage the surface in the long run.
- The vibrator is waterproof, so there is no danger of damaging it while using. However, while washing it, do not immerse it completely in water. Only wash it under a tap in running water.
- Alternatively, you can also take the vibrator out of its pouch and then wash the sleeve only. Once the sleeve is completely dry, put the vibrator back on.