User Manual – Multi-speed Rabbit Vibrator

Unpacking:

  • Inside the box, you will find the vibrator along with two AAA batteries. Take off the cover of the vibrator by pushing up the towards the “Open” sign at the rear end of the vibrator.
  • You will see the space for two batteries. Place the batteries while ensuring that the signs (+) and (-) are taken care of.
  • Put the cover back on the bottom by gently pushing it. The vibrator is now ready to use.

Usage:

  • The vibrator comes with different vibration modes which you can use according to your liking.
  • To turn on the vibrator, press button (2), as shown. The light of the vibrator will turn on.
  • Once the vibrator is on, you can toggle between different modes by pressing button (1) and (3). Button (1) controls the motor of the longer arm, while button (3) controls the motor of the shorter arm.
  • To turn off the vibrator, press button (2) again.

Washing:

  • Regular washing is essential to maintain hygiene. We advise you to wash the vibrator after every use.
  • The vibrator is water splash proof so you can wash the upper part directly under a tap in running water. DO NOT immerse the vibrator completely in a bucket/tumbler.
  • You can also use a soft detergent or soap. Try to keep the bottom end of the vibrator away from water as much as possible.

Push up this flat to take off the cover

Buttons on the vibrator