User Manual

Setting up:

  • The vibrator is powered by two AAA batteries that go inside the egg.

  • To replace/put-in the batteries, firmly hold the lower half of the egg and rotate the upper half until it comes off.

  • Place the batteries in the two slots provided. Be sure to check the +ve and -ve signs while placing the batteries.

  • Place the top back on and rotate it to seal the egg. Ensure that the seal is tight to prevent any water seepage during use.

Usage:

  • The vibrator comes with a remote that consists of two buttons.

  • To start the vibrator, press button (1).

  • The vibrator consists of different modes. To change the mode, press button (1) again. You can step up to consecutive modes by pressing (1).

  • To bring the vibration to the default high speed mode(3rd consecutive mode), press the button (2). To turn off the egg, press the button (2) again.

Washing:

  • We recommend washing the egg after every use.

  • You can wash the egg under a tap in running water, with soft detergent or simply in plain water.

  • DO NOT immerse the egg completely in a water bucket/tumbler to prevent water damage. Although the egg is waterproof, immersing it in such a way might lead to seepage.

 

The vibrating egg and remote